Non-Ticking Quartz DIY Wall Pendulum Clock Movement Mechanism with 6.7 Inch Long Spade Hand Battery Operated Repair Parts Replacement with 3 Pairs of Hand, 5/32 In Maxi Dial Thick, 1/2 In Shaft Length

Good clock replacement: This kit is good size replacement both in terms of the shaft and the size of the hands. It can be a replacement for your broken clock. Simple style clock movement: It can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well. Simple design, easy to use. Wide application: You are enable to use it to repair, replace or make a clock; Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc. Material: plastic and aluminumSecond hand motion: SweepAccuracy Within ±30seconds deviation each month (in normal temperature)Power: 1.5 V AA 1 x battery (not included) Please DO NOT USE Alkaline battery,Rechargeable batteries,they will damage the movement.Dimensions:Case size: approx. 56 x 110 x 18 mm (2.2 x 3.3 x 0.7inches)3 Clock Hands Set:More Choices, Suitable for Different Clock StylesPackage includes:1 x pendulum clock movement1 x metal hook2 x Second hand3 x Minute hand3 x Hour hand 3 X Plastic washer3 X Brass washer3 X Brass nut1 X Black end cap1 x User manualKindly note:- The hour and minute hands had a protective plastic coating that needs to be carefully removed. - Be careful not to bend the hands with too much pressure. - Do not tighten the brass hex nut too tight- Press hard to get all clock hands in place- Check if all hands are aligned- Check the size before buying.

• ✔️ High torque pendulum clock movement with metal hook:pendulum clock movement set comes with 3 pairs of long hands, Spades, Fancy, Straight (2 black and 1gold).Good for repairing, replacing or making a clock by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well.
• ✔️Accurate time-keeping&quiet motor :Size-total shaft length is 13 mm (1/2 inches), thread length is 6 mm (1/4 inches); Sweep second movement, suitable for 1 -4 mm (1/ 25 - 5/32 inches) thickness clock panel. Features high precision clock mechanism, which offers watchmaker's accuracy and dependability; equipped with sweeping motion, no ticking; powered by a AA battery.
• ✔️ Three of most popular clock hands:Different Sizes,Colors and Styles.From the center of the hole to the tip,The 3 different kinds of minute hands is about 14.8 cm/5.83 inches, 15 cm/5.91 inches,16.9 cm/6.65 inches in length. Meet different needs only in one package,perfect for your clock creations; get to pick out the style and length of the hands that look best with your clock at no additional charge.
• ✔️ Good Choose for You DIY or Repair: applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc.The Diameter of Clock Panel should be longer than 321mm/12.64in. The clock hands should be less than 358mm / 14.09in.
• ✔️ Package contents: a pendulum clock movement,a metal hook,,a black end cap,2 Second hands,3 Minute hands,3 Hour hands,3 Plastic washers,3 Brass washers and 3 Brass nuts,and come with the specially designed protect box.